dmesg - c-ray watt
Linux version 4.7.6-1-ARCH (builduser@tobias) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP PREEMPT Fri Sep 30 19:28:42 CEST 2016
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000b35acfff] usable
BIOS-e820: [mem 0x00000000b35ad000-0x00000000b432dfff] reserved
BIOS-e820: [mem 0x00000000b432e000-0x00000000b436ffff] usable
BIOS-e820: [mem 0x00000000b4370000-0x00000000b576ffff] reserved
BIOS-e820: [mem 0x00000000b5770000-0x00000000b9d7efff] usable
BIOS-e820: [mem 0x00000000b9d7f000-0x00000000ba17efff] type 20
BIOS-e820: [mem 0x00000000ba17f000-0x00000000ba77efff] reserved
BIOS-e820: [mem 0x00000000ba77f000-0x00000000baf7efff] ACPI NVS
BIOS-e820: [mem 0x00000000baf7f000-0x00000000baffefff] ACPI data
BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by INSYDE Corp.
efi: ACPI=0xbaffe000 ACPI 2.0=0xbaffe014 SMBIOS=0xba77ef98
SMBIOS 2.7 present.
DMI: LENOVO 5931/INVALID, BIOS 71CN51WW(V1.21) 07/12/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BB000000 mask FFF000000 uncachable
3 base 0BC000000 mask FFC000000 uncachable
4 base 0FF800000 mask FFF800000 write-protect
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask FC0000000 write-back
7 base 23F600000 mask FFFE00000 uncachable
8 base 23F800000 mask FFF800000 uncachable
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000082000] 82000 size 24576
BRK [0x01b58000, 0x01b58fff] PGTABLE
BRK [0x01b59000, 0x01b59fff] PGTABLE
BRK [0x01b5a000, 0x01b5afff] PGTABLE
BRK [0x01b5b000, 0x01b5bfff] PGTABLE
BRK [0x01b5c000, 0x01b5cfff] PGTABLE
BRK [0x01b5d000, 0x01b5dfff] PGTABLE
RAMDISK: [mem 0x374d4000-0x37a61fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BAFFE014 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BAFFE210 0000AC (v01 LENOVO CB-01 00000001 01000013)
ACPI: FACP 0x00000000BAFFA000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DSDT 0x00000000BAFEC000 00A1FA (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FACS 0x00000000BAF7B000 000040
ACPI: SLIC 0x00000000BAFFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: UEFI 0x00000000BAFFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASF! 0x00000000BAFFB000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: HPET 0x00000000BAFF9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: APIC 0x00000000BAFF8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MCFG 0x00000000BAFF7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BAFEB000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BOOT 0x00000000BAFE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASPT 0x00000000BAFE7000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBGP 0x00000000BAFE6000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FPDT 0x00000000BAFE4000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MSDM 0x00000000BAFE3000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BAFE2000 0008A2 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BAFE1000 000A92 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BAFDD000 0023FF (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BGRT 0x00000000BAFE0000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
NODE_DATA(0) allocated [mem 0x23f5f2000-0x23f5f5fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000087fff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x0000000040003fff]
node 0: [mem 0x0000000040005000-0x00000000b35acfff]
node 0: [mem 0x00000000b432e000-0x00000000b436ffff]
node 0: [mem 0x00000000b5770000-0x00000000b9d7efff]
node 0: [mem 0x00000000bafff000-0x00000000baffffff]
node 0: [mem 0x0000000100000000-0x000000023f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023f5fffff]
On node 0 totalpages: 2060165
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3975 pages, LIFO batch:0
DMA32 zone: 11688 pages used for memmap
DMA32 zone: 748030 pages, LIFO batch:31
Normal zone: 20440 pages used for memmap
Normal zone: 1308160 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xb35ad000-0xb432dfff]
PM: Registered nosave memory: [mem 0xb4370000-0xb576ffff]
PM: Registered nosave memory: [mem 0xb9d7f000-0xba17efff]
PM: Registered nosave memory: [mem 0xba17f000-0xba77efff]
PM: Registered nosave memory: [mem 0xba77f000-0xbaf7efff]
PM: Registered nosave memory: [mem 0xbaf7f000-0xbaffefff]
PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 33 pages/cpu @ffff88023f200000 s97944 r8192 d29032 u262144
pcpu-alloc: s97944 r8192 d29032 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2027948
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7975204K/8240660K available (6000K kernel code, 979K rwdata, 1888K rodata, 1244K init, 1164K bss, 265456K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:488 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2195.029 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.97 BogoMIPS (lpj=7316763)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 5 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81a2d000 - ffffffff81a33000)
ftrace: allocating 23850 entries in 94 pages
smpboot: Max logical packages: 2
smpboot: APIC(0) Converting physical 0 to logical package 0
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (35143.83 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xba77f000-0xbaf7efff] (8388608 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 6:35:29, date: 10/04/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Deleted _OSI(Windows 2012)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88023505A000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88023506A000 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880235060C00 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data: 1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd3400000-0xd37fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd3a00000-0xd3a0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd3a14000-0xd3a1400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd3a19000-0xd3a193ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd3a10000-0xd3a13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd3a18000-0xd3a183ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd3a17000-0xd3a177ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd3a15000-0xd3a150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
pci 0000:01:00.0: [10de:0de3] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 0x18: [mem 0xd3804000-0xd3804fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xd3800000-0xd3803fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd3800000-0xd38fffff 64bit pref]
pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xd3900000-0xd397ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xd3900000-0xd39fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: EC stopped
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI : EC: EC started
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xb35ad000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb4370000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb9d7f000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x1000-0x100f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] has been reserved
system 00:00: [io 0x0458-0x047f] has been reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: [io 0xfd60-0xfd63] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs ETD0615 ETD0001 PNP0f13 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xff000000-0xff000fff] has been reserved
system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xbfa00000-0xbfa00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x20000000-0x201fffff] has been reserved
system 00:06: [mem 0x40004000-0x40004fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xd3000000-0xd307ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd3800000-0xd38fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xd3980000-0xd398ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xd3900000-0xd39fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0xbfa00000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 2 [mem 0xd3800000-0xd38fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xd3900000-0xd39fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 5688K (ffff8800374d4000 - ffff880037a62000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xae780000-0xb2780000] (64MB) mapped at [ffff8800ae780000-ffff8800b277ffff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyrings
workingset: timestamp_bits=38 max_order=21 bucket_order=0
zbud: loaded
Key type big_key registered
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
efifb: mode is 1366x768x32, linelength=5504, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x17
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 4:986:568
rtc_cmos 00:01: setting system clock to 2016-10-04 06:35:32 UTC (1475562932)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1244K (ffffffff818f6000 - ffffffff81a2d000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 128K (ffff8800015e0000 - ffff880001600000)
Freeing unused kernel memory: 160K (ffff8800017d8000 - ffff880001800000)
random: systemd-tmpfile: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS3] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd3a19000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xd3a18000
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x6 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17180 irq 26
ata3: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17200 irq 26
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
usb 3-4: new high-speed USB device number 2 using xhci_hcd
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 231 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
Program systemd tried to access /dev/mem between bafe5000->bafe5008.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Reached target Slices.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Mounting Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting Debug File System...
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Paths.
EXT4-fs (sda3): re-mounted. Opts: data=ordered
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 198 (systemd-binfmt)
systemd[1]: Mounting Arbitrary Executable File Formats File System...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Started Journal Service.
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
video: unknown parameter 'use_native_backlight' ignored
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
systemd-journald[192]: Received request to flush runtime journal from PID 1
wmi: Mapper loaded
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (54 C)
input: PC Speaker as /devices/platform/pcspkr/input/input6
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8105e at 0xffffc90000c8c000, 20:89:84:88:80:d1, XID 00c00000 IRQ 27
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
[drm] Initialized drm 1.1.0 20060810
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (off-line)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
iTCO_vendor_support: vendor-support=0
Adding 7863292k swap on /dev/sda2. Priority:-1 extents:1 across:7863292k SSFS
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ath: phy0: Set BT/WLAN RX diversity capability
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 410000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
r8169 0000:02:00.0 enp2s0: renamed from eth0
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90001500000, irq=17
ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input11
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:47: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input12
usb 1-1.4: new high-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 2195.013 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (174f:146d)
uvcvideo 3-4:1.0: Entity type for entity Extension 5 was not initialized!
uvcvideo 3-4:1.0: Entity type for entity Extension 2 was not initialized!
uvcvideo 3-4:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 3-4:1.0: Entity type for entity Camera 1 was not initialized!
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f01)
psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0e.
psmouse serio1: elantech: Elan sample query result 05, 3d, 75
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
mousedev: PS/2 mouse device common for all mice
clocksource: Switched to clocksource tsc
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
random: nonblocking pool is initialized
usbcore: registered new interface driver rtsx_usb
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
usbcore: registered new interface driver ath3k
usb 1-1.3: USB disconnect, device number 3
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with c0:7b:bc:2e:10:41
wlp3s0: send auth to c0:7b:bc:2e:10:41 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with c0:7b:bc:2e:10:41 (try 1/3)
wlp3s0: RX AssocResp from c0:7b:bc:2e:10:41 (capab=0x431 status=0 aid=3)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 11 dBm as advertised by c0:7b:bc:2e:10:41
fuse init (API version 7.25)
wlp3s0: deauthenticating from c0:7b:bc:2e:10:41 by local choice (Reason: 3=DEAUTH_LEAVING)
pci_bus 0000:02: Allocating resources
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 400000 add_align 100000
pci_bus 0000:03: Allocating resources
pcieport 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 400000 min_align 100000
pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x004fffff] res_to_dev_res add_size 400000 min_align 100000
pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xbfb00000-0xbfefffff]
pcieport 0000:00:1c.1: BAR 15: assigned [mem 0xd3100000-0xd32fffff 64bit pref]
pcieport 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
pci_bus 0000:01: Allocating resources
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 389.243 msecs
PM: late suspend of devices complete after 12.193 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.344 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
cache: parent cpu4 should not be sleeping
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.461 msecs
PM: early resume of devices complete after 0.287 msecs
ath: phy0: ASPM enabled: 0x42
sd 1:0:0:0: [sda] Starting disk
rtc_cmos 00:01: System wakeup disabled by ACPI
usb 1-1.4: reset high-speed USB device number 4 using ehci-pci
usb 3-4: reset high-speed USB device number 2 using xhci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: configured for UDMA/133
PM: resume of devices complete after 513.280 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:03: Restoring backlight state
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
usb 1-1.3: new full-speed USB device number 5 using ehci-pci
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
usb 1-1.3: USB disconnect, device number 5
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with c0:7b:bc:2e:10:41
wlp3s0: send auth to c0:7b:bc:2e:10:41 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with c0:7b:bc:2e:10:41 (try 1/3)
wlp3s0: RX AssocResp from c0:7b:bc:2e:10:41 (capab=0x431 status=0 aid=3)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 11 dBm as advertised by c0:7b:bc:2e:10:41
wlp3s0: deauthenticating from c0:7b:bc:2e:10:41 by local choice (Reason: 3=DEAUTH_LEAVING)
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
pci_bus 0000:01: Allocating resources
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 389.772 msecs
PM: late suspend of devices complete after 10.510 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.379 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
cache: parent cpu4 should not be sleeping
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.465 msecs
PM: early resume of devices complete after 0.275 msecs
ath: phy0: ASPM enabled: 0x42
sd 1:0:0:0: [sda] Starting disk
rtc_cmos 00:01: System wakeup disabled by ACPI
usb 1-1.4: reset high-speed USB device number 4 using ehci-pci
usb 3-4: reset high-speed USB device number 2 using xhci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: configured for UDMA/133
PM: resume of devices complete after 513.488 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:03: Restoring backlight state
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
usb 1-1.3: new full-speed USB device number 6 using ehci-pci
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
usb 1-1.3: USB disconnect, device number 6
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with b0:00:b4:9b:77:11
wlp3s0: send auth to b0:00:b4:9b:77:11 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with b0:00:b4:9b:77:11 (try 1/3)
wlp3s0: RX AssocResp from b0:00:b4:9b:77:11 (capab=0x431 status=0 aid=14)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: Limiting TX power to 17 dBm as advertised by b0:00:b4:9b:77:11
ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400
wlp3s0: authenticate with b0:00:b4:9b:7e:31
wlp3s0: send auth to b0:00:b4:9b:7e:31 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with b0:00:b4:9b:7e:31 (try 1/3)
wlp3s0: RX AssocResp from b0:00:b4:9b:7e:31 (capab=0x431 status=0 aid=4)
wlp3s0: associated
wlp3s0: Limiting TX power to 17 dBm as advertised by b0:00:b4:9b:7e:31
wlp3s0: disconnect from AP b0:00:b4:9b:7e:31 for new auth to b0:00:b4:9b:77:11
wlp3s0: authenticate with b0:00:b4:9b:77:11
wlp3s0: send auth to b0:00:b4:9b:77:11 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with b0:00:b4:9b:77:11 (try 1/3)
wlp3s0: RX AssocResp from b0:00:b4:9b:77:11 (capab=0x431 status=0 aid=14)
wlp3s0: associated
wlp3s0: Limiting TX power to 17 dBm as advertised by b0:00:b4:9b:77:11
ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400